U.S. Electric Technicians Receive the Most Extensive Training Available

Hi, I’m James Holloman, Service Manager at US Electric.
U.S. Electric Service Technicians go through extensive training to deliver the most professional electrical service available in Richmond, VA

US Electric electricians need 12,000 hours of training before starting work.

That includes 8,000 field hours of experience and 4,000 class hours before they start working. US Electricians use a lot of critical thinking and math skills. They use trigonometry for conduit bending, calculus to figure out how many wires are in a conduit and high level algebra for lots of tasks like finding a resistance value or calculating a voltage drop. Candle equations are used frequently and measure the light level in a space.

If this sounds like gibberish to you, that’s ok, let us handle it.

But to give you an idea of what I mean…

Conduit Bending is involved in most installations.

Conduits protect your electrical wiring. Your electrical wires are running in different directions behind your walls. So, you can imagine that there will be some twists and turns along the way. Your US electrician will know exactly what kind of cable to install in wet or damp locations so that problems don’t arise. It’s easy to forget that even if you update the outside of the house, the wiring on the inside might need some work, too. Don’t let your wires end up like this. Check our residential services page for more information on how we can protect your home.

US ELECTRIC FACEBOOK IMAGE

Candle Equations are used frequently by US Electricians.

They basically let us know how much light is needed in a space. Candle equations are especially important in the LED lighting installation (one of our specialties). LED lights will save you up to 80% in energy costs.

US Electric is hard at work using these mathematical skills to solve your problems. All of our electricians are skilled in their craft and ready to guide you in the process. Our management team is also here for you every step of the way.

Never do it yourself.

Most circuit breaker panels have two vertical rows of breakers. Above (or sometimes below) the rows is a large breaker called the main breaker.

The main breaker controls the power to all of the other breakers. If you switch off the main breaker, you turn off all the circuits in the house at once. However, this does not mean the panel is not energized. The lugs that connect to the service lines remain energized whether the main breaker is on or off. That’s why you should never remove the dead front cover or go poking around inside a circuit breaker panel. The main breaker is marked with the value of protection (such as 100 or 200 amps) on the breaker lever. And if your breaker looks like this, it’s time to give us a call to make sure everything is up to date.

circuit breaker control panel

If this sounds like something you don’t want to worry about, I don’t blame you. This stuff is easy for us because we do it every day. Let us take some of the burden off your shoulders. Fill out our easy contact form or call us at 804-353-4928.